Understanding Pipeline Condition Assessment

Water Pipeline Condition Assessment provides water utilities with a method for assessing the structural condition of a single pipeline or a system of pipelines. By providing a benchmark to consider the current state of a pipeline, such condition assessments are an important part of a successful asset management programme. This is basically also about the pipeline condition assessment that provides an understanding about which is a corrosion-affected pipe, and how long will it take to bring back the pipe to its former condition.

Tops question to ask the professional who attend to the pipeline condition assessment

What is the first move in unclogging a blockage in the pipes?

It is also important to ask what will be the different instruments to check the condition of the pipes and how can they be implemented?

Is there any chemical method available to clean the pipes?

How long will it take to replace the damaged pipes with the hard and new ones?

Pouring hot water into the pipes is the first and most effective way to clear the blockage. If the blockage persists, you'll need to consider pipeline condition assessment.

What is Angle Stop?

• A shutoff valve between the water supply pipe and the fixture it supplies is known as an angle stop. It is used to switch off the water supply to a fixture in the event of a breakdown, repair, or leak. Excess rain, storm and blast are some of the instances when you might need to rejuvenate the condition of the pipes.
• Switching problem
• Excess debris accumulating and interfering with switching
• The pump will travel inside the basin, potentially interfering with the switching mechanism

 

What is Edutor?

Eductor is a device that uses a nozzle and throat to create a partial vacuum in a stream of water to pull liquid or air into the stream.

What are the basic equipment used for pipeline condition assessment?

• Faucet valve seat wrench 
• Faucet valve reseating tool
• Faucet packaging and washers
• Tubing cutter
• Teflon tape
• Cup plunger
• Flange plunger

 What skills does a pipeline condition assessment professional should have?

• Problem solving
• Critical thinking
• Listening and paying attention to instruction
• Decision making
• Co-coordinating
• Technical knowledge related to pipe fitting
• Name the different types of chemical drains used in pipeline condition assessment

Contaminants such as household bleach, peroxides, and nitrates are used in oxidising drain cleaners. The organic material in the clog becomes oxidised as a result of these chemicals. It also produces heat and gas, which helps to remove the obstruction. There are different varieties of pipes like cast iron, steel and other types which have high levels of corrosion and you also need to check the average lifespan of the pipes to ensure that they give you the best ideas on investment.

Acid drain cleaners: These cleaners have a higher acid concentration, and the hydronium ions in the acid react with the clogging material, releasing heat. This heat dissolves the material and removes the obstruction.

What are some of the safety and health issues a pipeline condition assessment professional come across?

• Exposure to flammable and combustible products
• Exposure to a dangerous substance such as lead, sulphur dioxide, mould, or carcinogenic substances
• Lifting heavy or awkward items
• Risk of eye injury from airborne debris
• Burns from hot appliances such as steam lines, hot water heaters, etc.
• Cuts and bruises from a sharp end of pipes
• Electric shock risk when digging under-ground water pipes

 You can now hire the best professionals and get the quotes from them. You can ask them for early signs of damage and analyze the overall cost after repairing is done.

Newer Post Older Post