Types of Industrial Fan and Its Detail
Air pollution and exhausting heat have become a popular issue in big industries where industrial fans are not installed. The industrial fan has the ability to produce a very large amount of air. These types of fans are heavily used in industries and act as a device to fulfill the requirements of dust collection, material handling, etc. Selection of industrial fan depends on the volume of the air flow required, pressure, and efficiency. The blades of the fan are connected to the center switch and stick and it runs through the motor. Normally, there are two types of industrial fans namely- axial fan and centrifugal fan.
Below, You will Read About The Different Types of The Industrial Fans and Their Features.
 |
| Industrial Fan |
#1. Centrifugal Industrial Fans: These types of industrial fans are used with systems which have high static resistance. In these fans, the power is generated with a disk which moves into a circular motion. Centrifugal fans are commonly used in processing industrial plants, such as thermal power, chemical, steel and, cement, etc., where movement of air is a necessary requirement. The different types of fan with different designs and capabilities are used depending on the amount of airflow and pressure requirements while carrying out industrial tasks.
In this industrial fan, a fan wheel is also there that includes disk, a central switch, and blades and it performs various structural functions. With the help of impeller, the speed of the air stream into the centrifugal fan can be increased. Due to its Nanty degree force, the air stream changes its direction and will not go in an axial direction. These fans have three drives stick techniques, such as belt driven, variable driven, and direct. If one wants to control the airflow then this industrial fan can be equipped with louvers and guided vans. The multiple fan system can be combined in order to achieve the desired flow rate.
#2. Axial Industrial Fans: In this type of industrial fan, the air flows in the linear direction across axis equal to the way of rotation along the stick. Once you have installed this industrial fan then you cannot change the way of the air flow. The size of the axial fan and its measurements depend on the location where you want to install the industrial fan. It comes in paddle, aerofoil, and variable, etc. If you want high efficiency and low noise then aerofoil blade fan is best suited to cater to your needs. These types of industrial fans are heavily used in cement industry, steel industry and pharmaceutical industry, etc. They are most commonly used in industries where there is a requirement of large amount of air at low pressures.
You can get customized industrial fans according to your requirement. They are efficient than other industrial fans and they require low power inputs and guided vanes are also installed in these type of fans to remove the air twist at the outlet so that air can flow in direct through the blades in the linear direction. There are three types of axial industrial fans available in the market namely; propeller, vane axial and tube axial but vane axial and tube axial are commonly used in the industries where the same downstream of air flow is required.
 |
| Industrial Fan |
Conclusion:
Now you know Industrial fan serves the purpose of cooling and heating issues in various industries, such as cement, chemical and steel industries. When you want to install the industrial fan, you should always consider the efficiency; the volume of the air flow required, and air pressure to install this fan. There are so many manufacturers available who manufacture such type of fans. You can contact them for your requirements.
No comments :