Importance of Machinery Removal in Decommissioning An Old Industrial Site
When a manufacturing unit is running in full fledge, almost all the machines are put to work in the unit and are used continuously. Machines are the lifelines of any manufacturing unit and you won’t find any manufacturing unit without a machine. At times, what happens is there are some situations where the process of machinery removals takes place.
This only happens when it is important for the machinery to be removed from a place and it needs to be done carefully as all the machines have a proper method of dismantling or else it can be damaged. So, mentioned below are 5 reasons why the process of machinery removal must be done.
 |
| Machinery Removals |
5 reasons why machinery removals are required
Well, there are many reasons why machinery removals from a manufacturing unit become necessary and here 5 of the most prominent reasons are listed below.
#1. Demolition of the Manufacturing Unit
When manufacturing units are declared illegal and need to be demolished on an immediate effect, one need to remove machinery. In such case, the building has to be broken but the expensive machinery inside the manufacturing unit has to be dismantled and sent off to another place either to be sold as scrap or to be used in another place. Therefore, in this case, the process of removing machines is very crucial.
#2. Shifting of a manufacturing unit from one place to another
Many people think that once a factory or a manufacturing unit is built it cannot move from that place. Well, the building cannot move but the machinery can surely be moved from one place to another. So, this is when the process of machinery removals takes place where the whole thing is dismantled and sent to the new place to be reinstated again where further they can be used.
#3. When an old machine is being replaced
This is normal, as in a manufacturing unit, the machines there have a lifespan, which the workers use. Once the lifespan of a machine is over, it will no longer be fit to work and needs to be replaced with a newer one. So that the work goes on in the manufacturing unit. In this situation, the old machine is totally removed from its place and is mostly sold away in scrap value. So that, at least some profit can be obtained from the resale and then the new ones are installed.
#4. When a machine gets contaminated
Contamination here simply means that the machine becomes a threat to humans working around it. This happens to the machines in a thermal plant where a lot of highly toxic materials are used for making current or manufacturing Bombs and Missiles. So, with the period and with the use of toxic materials inside the machine it gets damaged and the process of machinery removals has to take place.
Apart from that, it is dangerous and must be done by experts only, as they deal with the machines that have highly toxic elements in them.
#5. When a machine needs mass repair
Sometimes, some big machines need mass repair. Besides, for conducting this task when these machines are removed from the manufacturing unit and sent for repairs it needs to be dismantled. Once the machine is repaired and can work well, it is brought back and reinstalled to its place. It has to be done when the machine has some manufacturing defects that don’t allow it function normally.
Keep the above points in mind and get the help from only professionals for easy and smooth removal services.
No comments :